Diesel Compressors

Diesel Portable Compressors

Gas Compressors

Gas Driven Compressors

Hydraulic Compressors

Hydraulic Driven Compressors

All-In-One Power Systems

All In One Power Systems

Goodall Engine Starting Systems

Engine Starting Systems

Portable Air Dryers

Portable Sandblasting Air Dryers

Automatic & No Waste Drains

Condensate Management

Electrical

Extras

Monitoring Equipment

Replacement Desiccant

Desiccant

Tank Accessories

nano-purification solutions BPA Blower Purge Twin Tower Desiccant Air Dryer

Removes water vapor from compressed air, lowering the pressure dewpoint to -40°F.

nano-purification solutions BPA Blower Purge Twin Tower Desiccant Air Dryer

View Company Reviews

Highlights...

Features

250 to 6,250 SCFM capacity
Connection:
- 1 1/2 to 3" NPT
- 4 to 8" ANSI Flanged
4.5 to 125 kW heater
1.5 to 30 HP blower
ISO class 2 (1 micron) max particle size
ISO class 2 (-40°F pdp) max water content
150 PSIG pressure rating
120°F max ambient and inlet temperature
460/3/60 power supply requirement
NEMA 4X control panel

The nano-purification solutions BPA Blower Purge Twin Tower Desiccant Air Dryer regenerates using a combination of heat and ambient air to minimize or eliminate purge air usage. The dryer is operated by a rugged PLC control system offering features such as 'power on,' 'hours run,' and 'service required' indicators. Memory retention built into the PLC enables the controller to pick up where it left off in the drying cycle, ensuring consistently clean and dry air downstream. Compressor synchronization is a standard energy saving feature, which starts and stops the dryer with a signal from the compressor or point-of-use equipment to eliminate purge loss when drying is not required.

The unit includes low noise exhaust mufflers, specifically designed to minimize the noise of depressurization and purge exhaust, with high flow design to extend service life. The low Watt density heater includes a regeneration circuit that is fully insulated, and is designed for harsh industrial environments. A secondary heater contactor provides protection against overheating in the event of a primary contactor failure. The included high efficiency blower applies a regenerative design on models up to 3,000 SCFM, and centrifugal design on models 4,000 SCFM and higher.

Spec Sheets

Nano-Purification Solutions BPA Blower Purge Twin Tower Desiccant Air Dryer datasheet (1.2 MB)

Links

All possible part numbers

Need Help? Call an expert at 1-866-778-6572

We're open 8:00 am to 5:00 pm ET

Matt Mazanec
Founder & Manager
34 years of industry experience

Michael Rotondo
Senior Applications Specialist
42 years of industry experience

Erica LaFrance
Applications Specialist
9 years at Compressor World

Matt Murphy
Senior Applications Specialist
29 years of industry experience

Don Mazanec
Senior Applications Specialist
55 years of industry experience

Henry Santos
Senior Applications Specialist
40 years of industry experience

Tara Samuel
Parts Specialists
12 years of industry experience

Matt Mazanec
Founder & Manager
34 years of industry experience

Michael Rotondo
Senior Applications Specialist
42 years of industry experience

Erica LaFrance
Applications Specialist
9 years at Compressor World

Matt Murphy
Senior Applications Specialist
29 years of industry experience

Don Mazanec
Senior Applications Specialist
55 years of industry experience

Henry Santos
Senior Applications Specialist
40 years of industry experience

Tara Samuel
Parts Specialists
12 years of industry experience

Matt Mazanec
Founder & Manager
34 years of industry experience

Recently Viewed

nano-purification solutions BPA Blower Purge Twin Tower Desiccant Air Dryer

We’re open Mon - Fri, 8:00 am to 5:00 pm ET