Diesel Compressors

Diesel Portable Compressors

Gas Compressors

Gas Driven Compressors

Hydraulic Compressors

Hydraulic Driven Compressors

All-In-One Power Systems

All In One Power Systems

Goodall Engine Starting Systems

Engine Starting Systems

Portable Air Dryers

Portable Sandblasting Air Dryers

Automatic & No Waste Drains

Condensate Management

Electrical

Extras

Monitoring Equipment

Replacement Desiccant

Desiccant

Tank Accessories

FPZ

FPZ is known for being a manufacturer of high performance regenerative blowers that are used to move air in pressure or vacuum systems as well as a range or blowers suitable for handling gases such as methane or biogas.

FPO-engineer

Questions? Call one of our experts at 1-866-778-6572.

Filter FPZ

CATEGORY: Parts (); FPZ Parts (); Regenerative Blowers ()

IN STOCK: Yes (); No ()

FPZ MS Series Regenerative Blower

FPZ MS Series Regenerative Blower

Single stage blower with TEFC cURus motor and high efficiency impeller, mountable in any position.

Some Models in Stock

Starting at $833.00

FPZ Evolution Series Regenerative Blower

FPZ Evolution Series Regenerative Blower

5.5 to 30 HP single- or two-stage blower with 304 to 1492 CFM capacity.

Starting at $4,107.00

FPZ MD Series Regenerative Blower

FPZ MD Series Regenerative Blower

Single impeller two-stage blowers, 1.5 to 4 HP, for applications where higher pressures are required.

Starting at $1,726.00

FPZ 06 Series Regenerative Blower

FPZ 06 Series Regenerative Blower

Quiet operation blower with low weight cast aluminum construction and TEFC cURus motor.

Starting at $663.00

FPZ 10DL / 15DH Series Regenerative Blower

FPZ 10DL / 15DH Series Regenerative Blower

0.5 to 1 HP single stage blower requiring no lubrication or maintenance, mountable in any plane.

Starting at $1,128.40

FPZ TS Series Regenerative Blower

FPZ TS Series Regenerative Blower

Twin impeller, single stage blower. Designed for high airflow applications, 290 to 1093 CFM, 5.5 to 25 HP.

Starting at $2,995.00

Safety valve - 2" npt.

Safety valve - 3" npt.

Safety valve - 4" npt.

Inlet filter with weather hood.

Used on model(s) K05-6MS.

Replacement cartridge filter for FL5 paper.

Indoor intake filter.

Replacement filter element with prefilter.

Swing check valve - F x F.

Sound Enclosure for SCL R20-R30-R40-MD.

Replacement cartridge filter for FL9&10 Polyester.

Silencer - Aluminum - Male x End mount - npt threads.

Replacement element for FV6 filter.

Vacuum Gauge - 0-300" H2O - 2" dial 1/4" back mount.

Safety valve - high pressure - 2" npt.

Sleeve for flexible connection mounting - Aluminum.

Flexible connection.

Used on model(s) 15DH.

Pressure gauge - 0-300" H2O -2.5" dial 1/4" npt back mount.

Indoor intake filter.

Used on e09-11 MS + MD + TD.

Pipe tee with (2) taps for gauges - GAS threads.

Inlet filter with weather hood.

Cyclone In-Line filter.

Used on model(s) K09-12 TS.

Replacement filter element with prefilter.

Silencer - Steel - Male x End mount - GAS threads.

Replacement cartridge filter for FL6 paper.

Pressure gauge - 0-15 psig - 2" dial 1/4" npt back mount.

Replacement cartridge filter for FL8 paper.

Replacement cartridge filter for FL9&10 paper.

Inlet filter with weather hood.

Vacuum Gauge - 0-200" H2O - 2" dial 1/4" back mount.

Safety valve (vacuum or pressure) 10DL, 15DH, 06.

Indoor intake filter.

Used on SCL R20-30 MD (MOR and STS).

Inlet filter with weather hood.

Swing check valve - F x F.

Sound Enclosure for K05-6 MS / 30-40DH MOR.

FPZ CTD-375P-500C

K11-TS, K12-TS.

Inlet Protector - stainless steel screen - nylon thread.

Replacement cartridge filter for FL2-3-4 paper.

Sleeve for flexible connection mounting - Aluminum.

Replacement filter element with prefilter.

Silencer - Steel - Male x End mount - GAS threads.

Inlet filter with weather hood.

Replacement element for FC8 filter.

4" npt 90 deg PVC inlet filter manifold.

Used on e09-11 MS+MD+TD GOR / GVR.

FPZ FS-235P-400

Polyester Inlet filter - used on K09-10 MS+TD; K09-12 MD.

Swing check valve - F x F.

SCL R40 MD (MOR and STS).

Filter manifold for FL10.

Weather Enclosure for models SCL K06 and smaller.

Sound Enclosure for K07-8 R MD.

Sound Enclosure for e / K 7-8 MS; k05-06 TS.

Inlet Protector - stainless steel screen - nylon thread.

Rubber feet (larger size).

Female flange - used on FCD.

Female flange - used on: K 03 MS, SCL R20-R40.

Female flange - used on: OLD O6 and 15DH.

Replacement filter element.

Replacement filter element.

Inlet Protector - stainless steel screen - nylon thread.

Female flange - used on: K 04 MS; fits R series.

Female flange - used on FCD.

Sleeve for flexible connection mounting - Aluminum.

Female flange - used on all 2" blowers and FCD.

Sleeve for flexible connection mounting - Aluminum.

Flexible connection.

Inlet Protector - stainless steel screen - nylon thread.

Sleeve for flexible connection mounting - Aluminum.

Female flange - used on all 3" blowers and FCD.

Swing check valve - F x F.

Female flange - used on all 4" blowers.

Tube connector - allows direct connection of flexible hose.

Flexible connection.

Swing check valve - F x F.

Swing check valve - F x F.

Replacement filter element.

Replacement cartridge filter for FL1 paper.

Flexible connection.

Sleeve for flexible connection mounting - Aluminum.

Flange Connector - allows direct connection of safety val.

Replacement element for FV5 filter.

400V -20 mfd capacitor for 0.75 hp Lafert 1 phase motor.

400V-16 mfd capacitor for 1/3 + 1/2 hp Lafert 1 phase motors.

400V -31.5 mfd capacitor for 1 hp Lafert 1 phase motor.

400V-36 mfd capacitor for 2 hp IP 65 lafert WBR.

Silencer - Steel - Male x End mount - GAS threads.

Swing check valve - F x F.

Indoor intake filter.

Flexible connection.

Silencer - Steel - Male x Male - GAS threads.

450v-45 mfd capacitor for 1.5 hp (New Lafert).

450v-40 mfd capacitor for 1 hp (New Lafert).

Flexible connection.

Tube connector - allows direct connection of flexible hose.

Silencer - Steel - Male x Male - GAS threads.

Silencer - Steel - Male x Male - GAS threads.

Replacement element for FV8 filter.

Swing check valve - F x F.

Sleeve for flexible connection mounting - Fe (cut nipple).

Replacement filter element.

Filter manifold for(K series and R series).

Filter manifold for(K series).

Indoor intake filter.

Flange Connector - allows direct connection of safety val.

Replacement element for FC5 filter.

Replacement filter element with prefilter.

Indoor intake filter.

Used on model(s) O6.

Filter manifold for FL5 (K series).

400V -70 mfd capacitor for 2 hp Lafert or 3 hp Bonora motor (70 mfd-450 v OK).

450V-55 mfd capacitor for 1.5 hp and 2 hp Bonora 1 phase motors.

400V -50 mfd capacitor for 1.5 hp old Lafert+ 2 hp New lafert.

400V -60 mfd capacitor for 3 hp Lafert 1 phase motor.

Used on model(s) 10DL.

1.5" npt 90 deg PVC inlet filter manifold.

Female flange - used on all 5" blowers.

Inlet filter with weather hood.

Filter manifold for FL6 (K series).

Filter manifold for FL6 (DH series).

Flange Connector - allows direct connection of safety val.

Flexible connection.

Tube connector - allows direct connection of flexible hose.

Tube connector - allows direct connection of flexible hose.

Tube connector - allows direct connection of flexible hose.

FPZ PLX-0000247

galvanized piping assembly used to intall VRL6 + gauge.

Replacement element for FC6 filter.

2" npt 90 deg PVC inlet filter manifold.

90 degree manifold kit.

Flange Connector - allows direct connection of safety val.

Flange Connector - allows direct connection of safety val.

Flange Connector - allows direct connection of safety val.

Flange Connector - allows direct connection of safety val.

Inlet filter with weather hood.

Inlet filter with weather hood.

FPZ PLX-0000251

galvanized piping assembly used to intall VRL6 + gauge.

Replacement element for FV9 filter.

FPZ PLX-0000238

galvanized piping assembly used to intall VRL6 + gauge.

Pressure gauge - 0-15 psig - 2" dial 1/4" npt back mount.

Flexible connection.

90 degree manifold kit.

Used on model(s) K03-MS.

Vacuum Gauge - 0-60" H2O - 2" dial 1/4" back mount.

Pressure gauge - 0-60" H2O -2.5" dial 1/4" npt back mount.

Pressure gauge - 0-200" H2O -2.5" dial 1/4" npt back mount.

Used on SCL 20DH (blower is out of production).

Flexible connection.

Used on model(s) K04-MS.

90 degree manifold kit.

Used on model(s) 20DH-R (out of production).

Replacement filter element.

Used on model(s) 30DH-R (out of production).

Used on model(s) 30DH-STS (blower is out of production.

Inlet filter with weather hood.

Used on model(s) 20DH-STS (blower is out of production.

Replacement filter element with prefilter.

SCL 30DH (blower is out of production).

Used on model(s) K03-TS/TD.

Replacement element for FC9 filter.

Replacement filter element with prefilter.

Used on model(s) K04-TS/TD.

In-line filter (vacuum applications).

Replacement filter element with prefilter.

Filter manifold for FL8.

Safety valve - Vacuum only - 2".

90 degree manifold kit.

3" npt 90 deg PVC inlet filter manifold.

Replacement filter element with prefilter.

90 degree manifold kit.

Silencer - Steel - Male x End mount - GAS threads.

Used on model(s) K05-6 TD.

Safety valve - high pressure - 3" npt.

Silencer - Steel - Male x Male - GAS threads.

Silencer - Aluminum 3" npt male x end mount.

Used on e07-08 MD.

Used on e07-08 TS GOR / GVR.

Filter manifold for FL9.

Silencer - Aluminum - Male x Male - NPT threads.

90 degree manifold kit.

Pipe tee with (2) taps for gauges - GAS threads.

Used on model(s) K05-6 TS.

Used on e07-08 MS+TD.

safety valve - 2" npt anodized.

Used on e07-08 MD GOR / GVR.

Used on e07-08 MS-TD GOR / GVR.

Used on model(s) K07-8-TD.

FPZ PLX-0000239

galvanized piping assembly used to intall VRL6 + gauge.

In-line filter (vacuum applications).

Cyclone In-Line filter.

BPA Kit - Used on model K04-MS.

Used on model(s) k09-11 MS.

Sleeve for flexible connection mounting - Fe.

Safety valve = 3" npt - anodized.

Used on SCL 40DH (blower is out of production).

Cyclone In-Line filter.

Used on e07-08 TS.

Used on model(s) K07-8-TS.

Used on model(s) 40DH-STS (blower is out of production.

In-line filter (vacuum applications).

Safety valve - 4" npt anodized.

FPZ FS-245P-400

Polyester Inlet filter - used on K07-8 TS; K11-12 MS+TD.

BPA Kit Used on model(s) K05-6 TD.

Used on model(s) 40DH-R (out of production).

BPA Used on model(s) K05-6MS.

Cast aluminum foot bracket for vertical mounting.

Cast aluminum foot bracket for vertical mounting.

BPA kit -used on model(s) K07-8-MS.

Pipe tee with (2) taps for gauges - GAS threads.

BPA kit -used on model(s) K09-11.

FPZ KR0043 & KR0044

Used on model(s) 80SH & 80DH & 90SH & 90DH.

Used on 07-K08-TS - BPA.

FPZ PLX-0000250

galvanized piping assembly used to intall VRL6 + gauge.

Indoor intake filter - stainless steel screen.

Used on model 90DH-ST.

Used on model(s) K07R-8R-MD.

FPZ CV 5-502M-1330

Check valve - m x m.

Used on model(s) K07-8 MD.

Used on model(s) K12-MS; K09-12 MD.

Cyclone In-Line filter.

Used on model(s) K09-11TD.

Used on e09-11 TS gor / GVR.

Used on e09-11 TS.

Aluminum tube - Steel flange - Male x End mount - npt th.

FPZ CSL-2541-400I

K07-TS, K08-TS, K11-MS, K12-MS, K11-TD, K12-TD (includes (2) 1/4" taps).

Sound Enclosure for K03-MS-MOR.

Sound Enclosure for K04-MS-MOR.

FPZ VI6C50+0006

24 VDC Flow converting Device for SCL K04-MS.

FPZ VI6G50+0002

24 VDC Flow converting Device for SCL K05+ K06-MS.

FPZ CT-275P-500C*

K09-TS, K10-TS.

Base for SC9M-1, SC9M-2 & SC10M.

Weather Enclosure for models SCL K07 and larger.

Sound Enclosure for K05-6 TD.

Sound Enclosure for e / K07-8 TD.

Sound Enclosure for e / K09-10-11-12 MS/MD; e / K07-08.

Sound Enclosure for e / K 09-10-11-12 TD.

Sound Enclosure for e / K 09 -12 TS.

FPZ CSL inline filters utilize Polyester element. Prices are same for paper or wire mesh (no m

CSL inline filters utilize Polyester element. Prices are same for paper or wire mesh (no m.

Call for pricing

Recently Viewed

We’re open Mon - Fri, 8:00 am to 5:00 pm ET